Product Description
Company Info
Product Description
VDD: +1.8V ± 0.1V, VDDQ: +1.8V ± 0.1V for DDR2 SDRAM
VCC: +1.5V ± 0.1V, for Advanced Memory Buffer (AMB)
VDDSPD: +1.7V to +3.6V for SPD EEPROM
240-pin DDR2 FBDIMM with ECC to detect and report channel errors to the host memory controller
High-speed differential Point-to-point serial, dual-simplex bit lanes: 10-pair southbound (to FBDIMM)
And 14-pair northbound (from FBDIMM)
JEDEC standard VDDQ=1.5V +/- 0.075V Power Supply
1.5V centered-terminated push-pull I/O
Programmable CAS latencies (5, 6, 7, 8, 9, 10), Burst Length (4 & 8) and Burst Type
Auto Refresh (CRB) and Self Refresh
Bi-directional Differential Data Strobe
Off Chip Driver (OCD) impedance adjustment
On-Die termination using ODT pin
8 independent internal bank
Average Refresh Period 7.8us at lower than a TCASE 85º C, 3.9us at 85º C < TCASE < 95 º C - support High Temperature Self-Refresh rate enable feature
Serial presence detect with EEPROM
RDIMM Dimension (Nominal) 30.00 mm high, 133.35 mm wide
Based on JEDEC standard reference Raw Cards Lay out.
RoHS compliant
Gold plated contacts
Transmitter de-emphasis to reduce Inter Signal Interference (ISI)
Northbound and southbound single lane fail over and channel error detection
Support for up to 8 FB-DIMMs per channel
SMBus interface to AMB for configuration register access; Supporting-band and out-of-band command
Access
Test features supported include:
-Integrated thermal sensor and status indicator
-Supports MBIST, IBIST and Virtual Host mode
-Transparent mode and direct access mode for DRAM testing
Burst Length: 4, 8 Sequential or Interleave
Banks per SDRAM: 4 or 8
Over-temperature detection and alert
Serial presence detect with serial E2PROM
SSTL_18 Interface with DDR2 SDRAM
AMB in 655 ball FCBGA RoHS compliant package
Pb-Free (RoHS compliant) product
VCC: +1.5V ± 0.1V, for Advanced Memory Buffer (AMB)
VDDSPD: +1.7V to +3.6V for SPD EEPROM
240-pin DDR2 FBDIMM with ECC to detect and report channel errors to the host memory controller
High-speed differential Point-to-point serial, dual-simplex bit lanes: 10-pair southbound (to FBDIMM)
And 14-pair northbound (from FBDIMM)
JEDEC standard VDDQ=1.5V +/- 0.075V Power Supply
1.5V centered-terminated push-pull I/O
Programmable CAS latencies (5, 6, 7, 8, 9, 10), Burst Length (4 & 8) and Burst Type
Auto Refresh (CRB) and Self Refresh
Bi-directional Differential Data Strobe
Off Chip Driver (OCD) impedance adjustment
On-Die termination using ODT pin
8 independent internal bank
Average Refresh Period 7.8us at lower than a TCASE 85º C, 3.9us at 85º C < TCASE < 95 º C - support High Temperature Self-Refresh rate enable feature
Serial presence detect with EEPROM
RDIMM Dimension (Nominal) 30.00 mm high, 133.35 mm wide
Based on JEDEC standard reference Raw Cards Lay out.
RoHS compliant
Gold plated contacts
Transmitter de-emphasis to reduce Inter Signal Interference (ISI)
Northbound and southbound single lane fail over and channel error detection
Support for up to 8 FB-DIMMs per channel
SMBus interface to AMB for configuration register access; Supporting-band and out-of-band command
Access
Test features supported include:
-Integrated thermal sensor and status indicator
-Supports MBIST, IBIST and Virtual Host mode
-Transparent mode and direct access mode for DRAM testing
Burst Length: 4, 8 Sequential or Interleave
Banks per SDRAM: 4 or 8
Over-temperature detection and alert
Serial presence detect with serial E2PROM
SSTL_18 Interface with DDR2 SDRAM
AMB in 655 ball FCBGA RoHS compliant package
Pb-Free (RoHS compliant) product
Address:
Build A3, Zhengfeng Industrial Park, Fengtangroad, Tangwei Village, Fuyong Town, Baoan District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Arts & Crafts, Computer Products, Consumer Electronics, Electrical & Electronics
Management System Certification:
ISO 14000, ISO 9000
Main Products:
USB Flash Drive, Memory Module, USB Pen Drive, Promotion Gifts, USB Memory Disk, RAM, Server Memory, Thumb Drive, SSD, Module
Company Introduction:
Infomicro Overview
Infomicro Electronics (Shenzhen) Co., Ltd. is a world-class and professional manufacturer in the memory industry, specialized in the design and manufacture of USB flash drives, our experienced R&D team continues to create numerous unique, stylish and high-tech products to the OEM/ODM customers worldwide.
State-of-the-Art Manufacturing
Our Shenzhen based production facility, which boasts eleven highly automated surface mount (SMT) assembly lines, boost the monthly output to 1.7 million units of USB drives, and stands as one of the largest and most advanced SMT facility in China.
Quality Assurance
All Infomicro USB drives & Memory Module are back with lifetime warranty. Our intensive quality control and testing procedures are designed to ensure the highest possible product quality.
Infomicro Electronics (Shenzhen) Co., Ltd. is a world-class and professional manufacturer in the memory industry, specialized in the design and manufacture of USB flash drives, our experienced R&D team continues to create numerous unique, stylish and high-tech products to the OEM/ODM customers worldwide.
State-of-the-Art Manufacturing
Our Shenzhen based production facility, which boasts eleven highly automated surface mount (SMT) assembly lines, boost the monthly output to 1.7 million units of USB drives, and stands as one of the largest and most advanced SMT facility in China.
Quality Assurance
All Infomicro USB drives & Memory Module are back with lifetime warranty. Our intensive quality control and testing procedures are designed to ensure the highest possible product quality.
